As we all know, replica van cleef & arpels jewelry is the best famous brand in the jewelry industry. Get a high imitation van cleef and arpels jewelry is also a good things.
The copper buckle, the bead and the stylus separate the replica van cleef & arpels bracelet from the more common silver and metal finishes. Light blue blue grayish green pearls, shiny fluorite stone beads and crystal and copper jewelry combination. Another visible twisted pair, two lines in the same series through the beads between the alternating, and then separated into a separate bead.
1. Thread the thread through the buckle and connect the ends together so that the buckle slides down to the center of the thread. Thread the ends across the bead beads and slide the beads along the wires to the buckle. Press the crimp with a crimping pliers and secure the buckle.
2. Place the two wires through a 7 mm round, flat spiral, crystal and bronze bead (or whatever you like the combination of beads) until you reach about 3 cm.
3.The wires and the ropes were randomly divided into about 4 cm beads to each.
4. Create a pendant by placing the random beads through the decorative stylus. Trim the wires above the beads and turn the loop at the top. Push the pendant into the line at random intervals. Continue to be beads, the beads on the two shares, the separation of strands and pearles alone. In order to construct such replica van cleef & arpels alhambra necklace, the beads are 3 centimeters together with the strands, 1 centimeters apart, 4 centimeters together, 1cm interval and 3cm together.
5. To complete the fake van cleef & arpels clover bracelet, please pass the two lines through the curling beads, through the ring on the rod end of the elbow buckle, and then through the curling beads. Press the crimp with a crimping pliers and secure the buckle. Trim the extra tail to complete.
Also, you can do the same way apply in replica van cleef & arpels ring. You will find it is easy and interesting to do these jewelry by yourself.